Centre at Kalu-Sarai Near Hauz-Khas Metro station +91-9990657855

ASK Your Doubts
Tell Your Friends
SocialTwist Tell-a-Friend
DRDO Examination Pattern

 

The DRDO SET examination is of three hours duration. Each candidate appearing for the Test will be given one Question Booklet containing objective type questions, in two separate sections.

Section ‘A’ will consist of 100 questions to test the candidate’s knowledge in the subject as per syllabus given in Section V of this brochure. Each question will have 4 choices one of which will be correct. Each correct answer will fetch 4 marks. For each incorrect answer, 1 mark will be deducted. Section ‘B’ will consist of 50 questions to test the candidate’s aptitude relevant to Applied Research & Development. Each question will have 4 choices one of which will be correct. Each correct answer will fetch 2 marks. For each incorrect answer, ½ mark will be deducted.

Section ‘B’ will test the candidate’s aptitude relevant to Applied Research & Development. The distributions of 50 questions for Section ‘B’ are given below:

  • Logical Relations 10 Questions
  • Spatial Reasoning 10 Questions
  • Concept Formation 10 Questions
  • Abstract Reasoning 10 Questions
  • Numerical Reasoning 10 Questions

50 Questions

The merit list will be prepared, based on the marks obtained by the candidates in Section 'A' and Section 'B' and this list will be used for short listing the candidates for interview purely on merit basis subject to minimum Qualifying criteria as decided by RAC.

The final selection of the candidates will be based purely on their performance in the interview in which subject knowledge and / or job oriented aptitude will be tested. In accordance with the subject-wise merit, the offer of appointment to the selected candidates will be restricted to the number of vacancies.

However, the number of vacancies may vary. The appointment, however, will be subject to satisfying conditions like qualifying the Medical examination prescribed for Group 'A' Technical posts of Govt. of India with Field Service Liability and character verification, besides verification of SC/ST/OBC/HH/OH certificate if applicable. All Scientists 'B' to be inducted through DRDO SET 2008 will undergo for Post Induction Training (POINT) at Pune. Selected candidates have the liability to serve anywhere in India.

 

Subject Code, Discipline Code & Equivalents for Specialization

1: Subject Code, Discipline Code & Equivalents for Chemical Engineering [CH]

    S. No. Degree Subject Code Discipline Code

     

  • Chemical Engg/Tech CH 1
  • Chemical Plant Engg CH 2
  • Process Engg & Design CH 3

2: Subject Code, Discipline Code & Equivalents for Computer Science & Engineering [CS]

    S. No. Degree Subject Code Discipline Code

     

  • Computer Science & Engineering CS 1
  • Computer Science & Automation Engg. CS 2
  • Computer Science & Information Tech. CS 3
  • Computer Science & System Engg. CS 4
  • Computer Technology CS 5
  • Computer Technology & Informatics Engg. CS 6
  • Information Science / Technology Engg. CS 7
  • Information & Communication Tech. CS 8
  • Software Engineering CS 9
  • Any other equivalent Engg. degree CS 0

3: Subject Code, Discipline Code & Equivalents for Electronics & Commun. Engg. [EC]

    S. No. Degree Subject Code Discipline Code

     

  • Electronics Engineering EC 1
  • Electronics & Communication Engg. EC 2
  • Electronics & Control Engineering EC 3
  • Electronics & Instrumentation Engg. EC 4
  • Electronics & Telecomm.Engineering EC 5
  • Electronics & Electrical Commun. Engg. EC 6
  • Electrical with Commun. Engg. EC 7
  • Industrial Electronics Engg. EC 8

4: Subject Code, Discipline Code & Equivalents for Electrical Engineering [EE]

    S. No. Degree Subject Code Discipline Code

     

  • Electrical Engineering EE 1
  • Electrical & Electronics Engineering. EE 2
  • Electrical & Power Engineering EE 3
  • Power Electronics Engg. EE 4

5: Subject Code, Discipline Code & Equivalents for Instrumentation Engineering [IN]

    S. No. Degree Subject Code Discipline Code

     

  • Applied Electronics & Instrumentation IN 1
  • Instrumentation & Control Engg IN 2
  • Instrumentation Engg/Tech IN 3
  • Any other equivalent Engg. degree IN 0

6: Subject Code, Discipline Code & Equivalents for Mechanical Engineering [ME]

    S. No. Degree Subject Code Discipline Code

     

  • Mechanical Engineering ME 1
  • Production Engineering. ME 2
  • Design & Production Engineering. ME 3
  • Industrial Engineering. ME 4
  • Automobile Engineering. ME 5
  • Manufacturing Science & Engineering. ME 6
  • Any other equivalent Engg. degree ME 0

7: Subject Code, Discipline Code & Equivalents for Metallurgical Engineering [MT]

    S. No. Degree Subject Code Discipline Code

     

  • Metallurgy Engg. MT 1
  • Metallurgical Engineering. MT 2
  • Materials & Metallurgical Engineering. MT 3
  • Materials Engg. MT 4
  • Any other equivalent Engg. degree MT 0