•    9990657855, 9250514888
  • Email :eiidelhi@gmail.com

IES-ESE Syllabus For Civil Engineering Paper-I and Paper-II

 

Syllabus for IES: Indian Engineering Services Examination
CIVIL ENGINEERING PAPER - I (For both objective and conventional type papers)
 
1. BUILDING MATERIALS

Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminum, Fly Ash, Basic Admixtures, Timber, Bricks and Aggregates: Classification, properties and selection criteria;

Cement: Types, Composition, Properties, Uses, Specifications and various Tests; Lime & Cement Mortars and Concrete: Properties and various Tests; Design of Concrete Mixes: Proportioning of aggregates and methods of mix design.
 
2. SOLID MECHANICS
Elastic constants, Stress, plane stress, Strains, plane strain, Mohr’s circle of stress and strain, Elastic theories of failure, Principal Stresses, Bending, Shear and Torsion.
 
3. STRUCTURAL ANALYSIS
Basics of strength of materials, Types of stresses and strains, Bending moments and shear force, concept of bending and shear stresses; Analysis of determinate and indeterminate structures; Trusses, beams, plane frames; Rolling loads, Influence Lines, Unit load method & other methods; Free and Forced vibrations of single degree and multi degree freedom system; Suspended Cables; Concepts and use of Computer Aided Design.
 
4. DESIGN OF STEEL STRUCTURES
Principles of Working Stress methods, Design of tension and compression members, Design of beams and beam column connections, built-up sections, Girders, Industrial roofs, Principles of Ultimate load design.
 
5. DESIGN OF CONCRETE AND MASONRY STRUCTURES
Limit state design for bending, shear, axial compression and combined forces; Design of beams, Slabs, Lintels, Foundations, Retaining walls, Tanks, Staircases; Principles of pre-stressed concrete design including materials and methods; Earthquake resistant design of structures; Design of Masonry Structure.
 
6. CONSTRUCTION PRACTICE, PLANNING AND MANAGEMENT
Construction - Planning, Equipment, Site investigation and Management including Estimation with latest project management tools and network analysis for different Types of works; Analysis of Rates of various types of works; Tendering Process and Contract Management, Quality Control, Productivity, Operation Cost; Land acquisition; Labour safety and welfare.
 
CIVIL ENGINEERING PAPER-II (For both objective and conventional type papers)
 
1. Flow of Fluids, Hydraulic Machines and Hydro Power:
(a) Fluid Mechanics, Open Channel Flow, Pipe Flow:
Fluid properties; Dimensional Analysis and Modeling; Fluid dynamics including flow kinematics and measurements; Flow net; Viscosity, Boundary layer and control, Drag, Lift, Principles in open channel flow, Flow controls. Hydraulic jump; Surges; Pipe networks.
 
(b) HYDRAULIC MACHINES AND HYDROPOWER:
Various pumps, Air vessels, Hydraulic turbines – types, classifications & performance parameters; Power house – classification and layout, storage, pondage, control of supply.
 
2. Hydrology and Water Resources Engineering:

Hydrological cycle, Ground water hydrology, Well hydrology and related data analysis; Streams and their gauging; River morphology; Flood, drought and their management; Capacity of Reservoirs.

 
(b) WATER RESOURCES ENGINEERING :
Multipurpose uses of Water, River basins and their potential; Irrigation systems, water demand assessment; Resources - storages and their yields; Water logging, canal and drainage design, Gravity dams, falls, weirs, Energy dissipaters, barrage Distribution works, Cross drainage works and head-works and their design; Concepts in canal design, construction & maintenance; River training, measurement and analysis of rainfall.
 
3. ENVIRONMENTAL ENGINEERING
 
(a) WATER SUPPLY ENGINEERING :

Sources, Estimation, quality standards and testing of water and their treatment; Rural, Institutional and industrial water supply; Physical, chemical and biological characteristics and sources of water, Pollutants in water and its effects, Estimation of water demand; Drinking water Standards, Water Treatment Plants, Water distribution networks.

 
(b) WASTE WATER ENGINEERING:
Planning & design of domestic waste water, sewage collection and disposal; Plumbing Systems. Components and layout of sewerage system; Planning & design of Domestic Waste-water disposal system; Sludge management including treatment, disposal and re-use of treated effluents; Industrial waste waters and Effluent Treatment Plants including institutional and industrial sewage management.
 
(c) SOLID WASTE MANAGEMENT

Sources & classification of solid wastes along with planning & design of its management system; Disposal system, Beneficial aspects of wastes and Utilization by Civil Engineers.

 
(d) AIR AND NOISE POLLUTION AND ECOLOGY:

Concepts & general methodology.

 

4. Geo-technical Engineering and Foundation Engineering :

(a)Geo-technical Engineering: Soil exploration - planning & methods, Properties of soil, classification, various tests and inter-relationships; Permeability & Seepage, Compressibility, consolidation and Shearing resistance, Earth pressure theories and stress distribution in soil; Properties and uses of geo-synthetics.

 
(b) FOUNDATION ENGINEERING :
Types of foundations & selection criteria, bearing capacity, settlement analysis, design and testing of shallow & deep foundations; Slope stability analysis, Earthen embankments, Dams and Earth retaining structures: types, analysis and design, Principles of ground modifications.
 
5. Surveying and Geology:
(a) Surveying: Classification of surveys, various methodologies, instruments & analysis of measurement of distances, elevation and directions; Field astronomy, Global Positioning System; Map preparation; Photogrammetry; Remote sensing concepts; Survey Layout for culverts, canals, bridges, road/railway alignment and buildings, Setting out of Curves.

(b) Geology: Basic knowledge of Engineering geology & its application in projects.
 
6. TRANSPORTATION ENGINEERING :

Highways - Planning & construction methodology, Alignment and geometric design; Traffic Surveys and Controls; Principles of Flexible and Rigid pavements design.

Tunneling - Alignment, methods of construction, disposal of muck, drainage, lighting and ventilation.

Railways Systems – Terminology, Planning, designs and maintenance practices; track modernization.

Harbours – Terminology, layouts and planning.

Airports –
Layout, planning & design.




 

 

 

 


 


GATE 2018 Regular Course 

1. 25th Feb. 2017       2. 19th March 2017         

3. 4th April 2017         4. 6th May 2017       

5. 6th June 2017         6. 11th July 2017    

7. 8th August 2017     

8. 15th September 2017 (Crash Course Only)     

9. 15th October 2017 (Crash Course Only)

 

GATE 2018 Weekend Course 

1. 25th Feb. 2017        2. 19th March 2017        

3. 16th April 2017         4. 20th May 2017      

5. 24th June 2017         6. 11th July 2017    

7. 19th August 2017  

Download Complete Study Material & Class Notes Click Here

GATE 2018 Summer Batch

1. 20th April 2017        2. 6th May 2017          

3. 20th May 2017       4. 6th June 2017        

5. 24th June 2017    

 


Video Lectures

CH                




NEWS & UPDATES ABOUT GATE, IES & PSU'S
  • GATE Coaching in Delhi for ECE, EE, ME, CSE, CE, CH......

  • GATE Postal Course & Study Material for ECE, CH, CSE, ME, EE, CE & IN......

  • GATE Online test series for ECE, EE, ME, CSE, CE, CH & IN ......

Contact Us

Engineers Institute of India 28B/7, Jia-Sarai near IIT HauzKhas New Delhi – Pin Code = 110016

Help Line :
+91-9990657855, +91-9250514888

© Copyright EII | All Right reserved 2006 - 2017.